29th US - Japan Bridge Engineering Workshop
AGENDA
November 11-13, 2013
November 11, Monday - Day 1 Workshop
9:00 Opening Session
Moderators: David Sanders and Hideaki Nishida
Japanese Side Welcome
US Side Welcome
9:40 Session 1: Seismic and Tsunami1
Moderators: Shigeki Unjoh & Ian Buckle
- Tsunami Force on Bridge Comparison of Two Wave Types by Experimental Test
Kenji Kosa
- Recent Changes to Seismic Design Practice in California
Mark Yashinsky
- Numerical Assessment of Tsunami-induced Effect on Bridge Behavior
Hisashi Nakao,Guangfeng Zhang, Toru Sumimura, and Jun-ichi Hoshikuma
- Hybrid Testing of a Prestressed Girder Bridge to Resist Wave Forces
Chris Higgins,Jora Lehrman, Christopher Bradner,Thomas Schumacher, and Daniel Cox
- Study on Tsunami Wave Force Acting on a Bridge Superstructure
Hidekazu Hayashi
12:50 Session 2: Maintenance
Moderators: Yoshitomi Kimura & Raimondo Betti
- A comprehensive Bridge Preservation Program to Extend Service Life
Bruce Johnson
- Investigation and Countermeasures for Fatigue Cracks that Emerged on the
Finger Joint of the Cable-Stayed Bridge "Tsurumi-Tsubasa Bridge"
Tsuyoshi Kosugi
- Preliminary Seismic Considerations for Pulaski Skyway Rehabilitation Project
Hannah Cheng
- Development of Fast Accelerated Set Concrete Application for Repairing
the Deteriorated Reinforced Concrete Decks
Yuichi Ishikawa
14:40 Session 3: Inspection
Moderators: Takashi Tamakoshi & Chris Higgins
- Bridge Inspection Standards in Japan and US
Masahiro Shirato
- Non-Destructive Monitoring and Active Prevention of Corrosion in Suspension
Bridge Main Cables
Raimondo Betti
- Soundness Evaluation of Prestressed Concrete Structures by Vibration Measurement
Hidetaka Honma
- Concrete Bridge Deck Condition Assessment using Robotic System Rabit
Ali Maher
- Non-Destructive Bridge Deck Assessment using Image Processing and Infrared
Thermography
Masato Matsumoto
October 12, Tuesday - Day 2 Workshop
9:00 Session 4: Retrofit and Repair Work
Moderators: Jun Murakoshi & Mark Yashinsky
- The Skagit River Bridge Collapse and Recovery Plan
Bijan Khaleghi
- Repair Works on a Composite Girder Cable-Stayed Bridge damaged by Ship
Collision (Binh Bridge in Vietnam)
Tomonobu Tokuchi
- Incorporating Buckling Restrained Braces (BRB) as part of the Auburn-Foresthill
Bridge Seismic Retrofit
Mark Reno
- Load-carrying Capacity of Corroded End Cross-girder
Eiki Yamaguchi
10:50 Session 5: Design1
Moderators: Toshiaki Nanazawa & Bijan Khaleghi
- Which uncertainty (or error) is the most critical in geotechnical design
Yusuke Honjo
- 2010 Maule Chile Earthquake wall performance and its application to improvement
of the AASHTO LRFD seismic wall design specifications
Tony Allen
- The Structural Design of Pile Foundations based on LRFD for Japanese Highways
Hideaki Nishida
- Effect of Deck Plate Thickness of Orthotropic Steel Deck on Fatigue Durability
Jun Murakoshi
13:20 Session 6: Seismic and Tsunami 2
Moderators: Takaaki Kusakabe & Bruce Johnson
- Concepts for Tsunami-Resistant Design Criteria for Coastal Bridges
Masahiro Shirato
- Quantifying the Seismic Resilience of Highway Networks using a Loss-estimation Tool
Ian Buckle
- Seismic Requirements for Laminated Elastomeric Bearings and Test Protocol
for Verification
Masatsugu Shinohara
- Cyclic Loading Protocol for Bridge Columns subjected to Subduction Mega
Earthquakes
Peter Dusicka
- Preliminary Analysis on Seismic Input Loss at a Pile Foundation
Shojiro Kataoka
15:30 Breakout Sessions
Group A Seismic Engineering
Group B Maintenance
October 13, Wednesday - Day 3 Workshop
8:30 Session 7: Construction and Design2
Moderators: Masahiro Ishida & Mark Reno
- Performance of Accelerated Bridge Construction Connection in Bridges subjected
to Extreme Events (NCHRP DOMESTIC SCAN 11-02)
Wei-huei "Phil" Yen
- Development and Design of New Steel Pipe Integrated Pier with Shear Link
Ryohei Nakamura
- A Precast, Pretensioned, Rocking Bridge Bent for Rapid Construction and
High Seismic Performance
David Sanders
- An Experimental Study on Seismic Performance of Hybrid Steel piers with
Vertical Ribs Made from SBHS700
Kiyoshi Ono
- A New Model for Sustainable Solutions to Bridge Infrastructure subjected
to Multiple Threats (SSIMT)
Jamie Padgett
- A Design, Construction of the Socket Anchoring System between Steel Pier and the Foundation in MORIGUCHI JCT
Hiroyuki Nagareta
- Seismic Performance of Precast Concrete Bents used for Accelerated Bridge
Construction
Bijan Khaleghi
11:30 Closing Session
Moderators: David Sanders and Hideaki Nishida
Settlement of Resolution
Remarks: W. Phillip Yen (Chairman for the U.S.A Side)
Closing Remarks: Hiroshi Matsuura (Chairman for the Japan Side)